Yamaha XVS950CU Owner'S Manual Download Page 59 | Manualshive

Page: 59 / 86

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-18

6

EAU36503

Brake light switches

The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, have a Yamaha deal-
er adjust the brake light switches.

EAU22392

Checking the front and rear
brake pads

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.

EAU22430

Front brake pads

Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear

indicator grooves have almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.

EAU22500

Rear brake pads

Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
thickness is less than 0.8 mm (0.03 in),
have a Yamaha dealer replace the
brake pads as a set.

1. Brake pad wear indicator groove

1

1

1. Lining thickness

1

U2DXE0E0.book Page 18 Monday, June 24, 2013 9:30 AM

«
...
57
58
59
60
61
...
»

Summary of Contents for XVS950CU























































































Reviews:

No comments

Related manuals for XVS950CU

Brand: Yamaha Pages: 650

TroyLee Designs

Brand: A3 HELMET Pages: 244

Brand: Dakota Digital Pages: 7

Brand: METRAKIT Pages: 53

Brand: Honda Pages: 41

Brand: KTM Pages: 25

Brand: GYS Pages: 36

Brand: Ecomobility Green World Pages: 24

Brand: hepco & becker Pages: 2

2007 PAMPERA 125

Brand: GAS GAS Pages: 58

Brand: MSA Pages: 168

Brand: LSL Pages: 4

Can-Am Spyder RT

Brand: F4Customs Pages: 3

Brand: IBEX Pages: 3

Brand: Shift Power Pages: 7

TERMOSCUD-R204X

Brand: tucanourbano Pages: 2

TERMOSCUD R200X

Brand: tucanourbano Pages: 4

TERMOSCUD R192X

Brand: tucanourbano Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands