manualshive.com logo in svg

Yamaha XVS1300AW 2007, Owner'S Manual

Share
Download
Yamaha XVS1300AW 2007 Owner'S Manual Download Page 68

PERIODIC MAINTENANCE AND MINOR REPAIR

6-27

6

●

KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

To charge the battery

Have a Yamaha dealer charge the bat-
tery as soon as possible if it seems to
have discharged. Keep in mind that the
battery tends to discharge more quickly
if the vehicle is equipped with optional
electrical accessories.

To store the battery

1. If the vehicle will not be used for

more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.

2. If the battery will be stored for more

than two months, check it at least
once a month and fully charge it if
necessary.

3. Fully charge the battery before in-

stallation.

4. After installation, make sure that

the battery leads are properly con-
nected to the battery terminals.

CAUTION:

ECA10630

●

Always keep the battery
charged. Storing a discharged
battery can cause permanent
battery damage.

●

To charge a sealed-type (MF)
battery, a special (constant-volt-
age) battery charger is required.
Using a conventional battery
charger will damage the battery.
If you do not have access to a
sealed-type (MF) battery charg-
er, have a Yamaha dealer
charge your battery.

EAU42581

Replacing the fuses 

The main fuse, the fuel injection system
fuse, and the fuse box, which contains
the fuses for the individual circuits, are
located under the rider seat. (See page
3-14.)
If a fuse is blown, replace it as follows.

1. Unhook the battery band, and then

remove the battery cover.

2. Turn the key to “OFF” and turn off

the electrical circuit in question.

3. Remove the blown fuse, and then

install a new fuse of the specified
amperage.

1. Battery band

2. Battery cover

U12C20E0.book  Page 27  Wednesday, October 18, 2006  3:54 PM

Summary of Contents for XVS1300AW 2007



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands