manualshive.com logo in svg

Yamaha XVS1300AW 2007, Owner'S Manual

Share
Download
Yamaha XVS1300AW 2007 Owner'S Manual Download Page 62

PERIODIC MAINTENANCE AND MINOR REPAIR

6-21

6

EAU23040

Drive belt slack 

The drive belt slack should be checked
and adjusted at the intervals specified
in the periodic maintenance and lubri-
cation chart.

EAU38410

To check the drive belt slack

1. Place the vehicle on the sidestand.
2. Note the current position of the

drive belt using the marks near the
drive belt check hole.

NOTE:

The marks near the drive belt check
hole are 5.0 mm (0.2 in) apart.

3. Note the position of the drive belt

with a force of 45 N (4.5 kgf, 10 lbf)
applied to the belt with a belt ten-
sion gauge as shown.

NOTE:

A belt tension gauge is available at a
Yamaha dealer.

4. Calculate the drive belt slack by

subtracting the measurement not-
ed in step 2 from the measurement
noted in step 3.

5. If the drive belt slack is incorrect,

have a Yamaha dealer adjust it.

EAU23100

Checking and lubricating the 
cables 

The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.

WARNING

EWA10720

Damage to the outer sheath may in-
terfere with proper cable operation
and will cause the inner cable to
rust. Replace a damaged cable as
soon as possible to prevent unsafe
conditions.

1. Drive belt
2. Marks

3. Drive belt slack

1. Belt tension gauge

Drive belt slack:

5.0–7.0 mm (0.20–0.28 in)

Recommended lubricant:

Engine oil

U12C20E0.book  Page 21  Wednesday, October 18, 2006  3:54 PM

Summary of Contents for XVS1300AW 2007



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands