–14–
K Position the mark on the steel
band to forward.
L Fasten the wireharness with a
band on the tool box plate.
M Fasten the wireharness to the
frame with a plastic locking tie.
Position the locking tie front of
the holder.
N Route the wireharness outside
of the guide on the frame.
CABLE ROUTING
SPEC
O Clamp the clutch cable and start-
er cable with a holder.
Position the end of holder down
side.
P Route the igniter lead through
the igniter plate hole to the wire-
harness.
Q To the wireharness.
R Clamp the taillight lead with mud
guard clamp.
S Clamp the taillight lead with a
holder on the mud guard.
T Position the locking tie upward.
U The front direction of the level
body.
