Yamaha XVC1100P, Owner'S Manual

Page: 26 / 115

INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
EAU03193
Speedometer unit
The speedometer unit is equipped with
a digital odometer and a tripmeter. The
speedometer shows riding speed. The
odometer shows the total distance trav-
eled. The tripmeter shows the distance
traveled since it was last set to zero.
Pushing the “TRIP” button switches the
display between the odometer mode
“ODO” and the tripmeter mode “TRIP”.
To reset the tripmeter, select it by
pushing the “TRIP” button, and then
push the “TRIP” button again and hold
it down for at least one second. The
tripmeter can be used to estimate the
distance that can be traveled with a full
tank of fuel. This information will enable
you to plan future fuel stops.
NOTE:
_
This motorcycle is not equipped with a
tachometer; however, it has a built-in
speed limiter, which prevents the en-
gine speed from exceeding approxi-
mately 6,800 r/min and the vehicle
speed from exceeding approximately
175 km/h (110 mi/h).
_
EAU00118
Handlebar switches
EAU03888
Dimmer switch “ / ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
EAU00129
Horn switch “ ”
Press this switch to sound the horn.
1. “TRIP” button
2. Odometer/trip meter 1. Dimmer switch “ / ”
2. Horn switch “ ”
3. Turn signal switch “ / ”
U5PB11.book Page 3 Thursday, June 14, 2001 8:59 AM