background image

INSTRUMENT AND CONTROL FUNCTIONS

4-4

4

Odometer, tripmeters, fuel reserve
tripmeter and clock

Push the “SELECT” switch to change
the display between the odometer
mode “ODO”, the tripmeter modes
“TRIP A” and “TRIP B” in the following
order:
ODO 

 TRIP A 

 TRIP B 

 ODO

If the fuel level warning light comes on
(see page 4-1), the odometer display
will automatically change to the fuel re-
serve tripmeter mode “F-TRIP” and
start counting the distance traveled
from that point. In that case, push the
“SELECT” switch to change the display
between the various tripmeter and
odometer modes in the following order:

F-TRIP 

 TRIP A 

 TRIP B 

 ODO

 F-TRIP

To reset a tripmeter, select it by push-
ing the “SELECT” switch, and then
push the reset switch for at least one
second. If you do not reset the fuel re-
serve tripmeter manually, it will reset it-
self automatically, and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).

To set the clock:

1. Push the “SELECT” and reset

switches together for at least three
seconds.

2. When the hour digits start flashing,

push the reset switch to set the
hours.

3. Push the “SELECT” switch, and

the minute digits will start flashing.

4. Push the reset switch to set the

minutes.

5. Push the “SELECT” switch and

then release it to start the clock.

Self-diagnosis device

This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
will come on and the odometer/tripme-
ter/clock display will indicate an error
code.

1. Odometer/tripmeter/fuel reserve tripme-

ter/clock

1

1. Clock

1

1. Error code display
2. Engine trouble warning light “

1

2

U29S15E0.book  Page 4  Friday, July 20, 2012  1:34 PM

Summary of Contents for XV19CSD

































































































Reviews: