Yamaha XV1700PCR Road Star Warrior, Service Manual

Page: 214 / 605

4 - 5
CHAS
3. Measure:
• radial wheel runout
1
• lateral wheel runout
2
Over the specified limits
→
Replace.
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
4. Check:
• wheel bearings
Front wheel turns roughly or is loose
→
Replace the wheel bearings.
• oil seals
Damage/wear
→
Replace.
5. Replace:
• wheel bearings
• oil seals
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Clean the outside of the front wheel hub.
b. Remove the oil seals
1
with a flat-head
screwdriver.
NOTE:
_
To prevent damaging the wheel, place a rag
2
between the screwdriver and the wheel sur-
face.
c. Remove the wheel bearings
3
with a gen-
eral bearing puller.
d. Install the new wheel bearings and oil seals
in the reverse order of disassembly.
CAUTION:
_
Do not contact the wheel bearing inner race
4
or balls
5
. Contact should be made only
with the outer race
6
.
NOTE:
_
Use a socket
7
that matches the diameter of
the wheel bearing outer race and oil seal.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
2
1
New
New
New
FRONT WHEEL AND BRAKE DISCS