Yamaha XTZ690 Owner'S Manual Download

Page: 84 / 102

Perio

ic maintenance an

justment

6-33

EAUN2261

Vehicle li

hts

This model is equipped with LED lights
for headlights, auxiliary lights and
brake/tail light. If a light does not come
on, check the fuse and then have a
Yamaha dealer check the vehicle.

NOTICE

ECA16581

Do not affix any type of tinte

film or

stickers to the hea

ht lens.

EAU24182

Tail/

rake li

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.

EAU24205

Replacin

a turn si

nal li

1. Remove the turn signal light lens

by removing the screw.

2. Remove the burnt-out bulb by

pushing it in and turning it coun-
terclockwise.

1. Turn signal light lens
2. Screw

UBW3E0E0.book Page 33 Friday, May 24, 2019 11:01 AM

Summary of Contents for XTZ690







































































































Search results

Summary of Contents for XTZ690

Reviews:

Related manuals for XTZ690

Brands by name

Popular brands

Yamaha XTZ690, Owner'S Manual

Search results

Summary of Contents for XTZ690

Reviews:

Related manuals for XTZ690

Brands by name

Popular brands