manualshive.com logo in svg

Yamaha XT225V, Owner'S Manual, Page: 64 / 97

Share
Download
Yamaha XT225V Owner'S Manual Download Page 64

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-28

 

1

2

3

4

5

6

7

8

9

CAUTION:

 

 ECA11110

 

Do not use engine oil or any other lu-
bricants for the drive chain, as they
may contain substances that could

 

damage the O-rings.

 

EAU23090

 

Checking and lubricating the 
cables 

 

The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.

WARNING

 

EWA10710

 

Damage to the outer housing of ca-
bles may result in internal rusting
and cause interference with cable
movement. Replace damaged ca-
bles as soon as possible to prevent

 

unsafe conditions.

 

EAU23111

 

Checking and lubricating the 
throttle grip and cable 

 

The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated at
the intervals specified in the periodic
maintenance chart.

 

Recommended lubricant:

 

Yamaha Chain and Cable Lube or 
engine oil SAE 10W-30 (API SE)

Summary of Contents for XT225V


































































































Reviews:

No comments