background image

INSTRUMENT AND CONTROL FUNCTIONS

3-15

3

NOTICE

ECA11590

If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.

LCD and tachometer brightness
control mode

This function allows you to adjust the
brightness of the LCD, and the tachom-
eter panel and needle to suit the out-
side lighting conditions.

To set the brightness

1. Turn the key to “OFF”.
2. Push and hold the left button.
3. Turn the key to “ON”, and then re-

lease the left button after five sec-
onds.

4. Push the right button to select the

desired brightness level.

5. Push the left button to confirm the

selected brightness level. The dis-
play returns to the odometer or
tripmeter mode.

EAU12331

Anti-theft alarm (optional) 

This model can be equipped with an
optional anti-theft alarm by a Yamaha
dealer. Contact a Yamaha dealer for
more information.

1. Tachometer panel

2. Tachometer needle
3. LCD

4. Brightness level

5. Right set button
6. Left set button

1

2

3

4

6

5

U23PE2E0.book  Page 15  Monday, August 1, 2011  4:25 PM

Summary of Contents for Xt1200ZB













































































































Reviews: