Instrument an
d
control functions
4-10
4
TIP
If traveling at speeds under 20 km/h
(12 mi/h), “_ _._” is displayed.
Avera
g
e fuel consumption
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either “AVE_ _._ km/L” or
“AVE_ _._ L/100 km”, or when using
miles, to “AVE_ _._ MPG” as well.
z
“AVE_ _._ km/L”: The average dis-
tance that can be traveled on 1.0 L
of fuel.
z
“AVE_ _._ L/100 km”: The average
amount of fuel necessary to travel
100 km.
z
“AVE_ _._ MPG”: The average dis-
tance that can be traveled on
1.0 Imp.gal of fuel.
To switch the average fuel consump-
tion display settings, push the bottom
set button for two seconds.
To reset the average fuel consumption,
select it by pushing the bottom set but-
ton. The average fuel consumption dis-
play will flash for a few seconds. While
the display is flashing, push the top set
button for one second.
TIP
After resetting the average fuel con-
sumption, “_ _._” will be shown until
the vehicle has traveled 1 km (0.6 mi).
Coolant temperature
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message “HI” flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 7-38.)
TIP
z
When the coolant temperature is
below 40 °C, “Lo” will be dis-
played.
z
The coolant temperature varies
with changes in the weather and
engine load.
1. Average fuel consumption display
1
1. Coolant temperature display
1
UBAEE0E0.book Page 10 Tuesday, December 10, 2019 2:42 PM
