GEN
INFO
CHECKING THE CONNECTIONS
햲
+
-
+
-
EAS00026
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1.Disconnect:
• lead
• coupler
• connector
2.Check:
• lead
• coupler
• connector
Moisture
→
Dry with an air blower.
Rust/stains
→
Connect and disconnect sev-
eral times.
3.Check:
• all connections
Loose connection
→
Connect properly.
NOTE:
If the pin
햲
on the terminal is flattened, bend it
up.
4.Connect:
• lead
• coupler
• connector
NOTE:
Make sure all connections are tight.
5.Check:
• continuity
(with the pocket tester)
Pocket tester
90890-03112
NOTE:
• If there is no continuity, clean the terminals.
• When checking the wire harness, perform steps
1 to 3.
•
As a quick remedy, use a contact revitalizer
available at most part stores.
1-6
Summary of Contents for XQ125
Page 1: ...XQ125 2001 XQ150 5HT1 AE2 SERVICE MANUAL ...
Page 7: ...1 GEN INFO ...
Page 18: ...2 SPEC ...
