Yamaha XP80, Owner'S Manual

Page: 11 / 14

11
Use the supplied stereo phone cable to connect the output jack on the XP series pad to the input jack
on the DTX Series drum Trigger Module. Insert the L-shaped connector into the output jack (OUTPUT)
on the XP series pad.
• In order to protect the cable and connector, be sure to hook the cable around the Cord Clip.
No Sound, Volume is Low

Is the pad connected to the correct input number of the DTX Series Drum Trigger Module using the
supplied stereo phone cable? When a pad is connected with a mono phone cable, the voices
assigned to the rim sections are not produced.
Also, please refer to the Owner’s Manual that came with your DTX Series Drum Trigger Module
for more information regarding the problems described above and any other problems that you
may be experiencing. If a solution cannot be found to the problem after consulting the manuals,
please contact the dealer from whom you purchased the product.
Connections
Troubleshooting
OUTPUT
OUTPUT
XP70 XP80
Cord Clip
Cord Clip