PERIODIC MAINTENANCE AND ADJUSTMENT
6-31
6
EAUM3062
Replacin
g
a rear turn si
g
nal
li
g
ht
b
ul
b
1. Place the scooter on the center-
stand.
2. Open the seat. (See page 3-19.)
3. Remove the rear storage com-
partment by removing the bolts.
4. Remove the socket (together with
the turn signal light bulb) by turn-
ing it counterclockwise.
5. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
6. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
7. Install the socket (together with
the bulb) by turning it clockwise.
8. Place the rear storage compart-
ment in the original position and
install the bolts.
9. Close the seat.
1. Storage compartment
2. Bolt
3. Rubber cap
ZAUM1040
2
3
1
1. Turn signal light bulb socket
1. Turn signal light bulb
2. Turn signal light bulb socket
ZAUM1038
1
ZAUM1039
1
2
U2DLE1E0.book Page 31 Friday, November 8, 2013 7:45 PM
