manualshive.com logo in svg

Yamaha XMAX 125i 2005, Owner'S Manual, Page: 55 / 76

Share
Download
Yamaha XMAX 125i 2005 Owner'S Manual Download Page 55

when refilling. Water will signifi-
cantly lower the boiling point of
the fluid and may result in vapor
lock.

●

Brake fluid may deteriorate pain-
ted surfaces or plastic parts.
Always clean up spilled fluid
immediately.

●

As the brake pads wear, it is nor-
mal for the brake fluid level to
gradually go down. However, if
the brake fluid level goes down
suddenly, have a Yamaha dealer
check the cause.

EAUM1360

Changing the brake fluid

Have a Yamaha dealer change the
brake fluid at the intervals specified in
the periodic maintenance and lubrica-
tion chart. In addition, have the brake
hose replaced every four years or
whenever it is damaged or leaking.

EAU23111

Checking and lubricating the
throttle grip and cable

The operation of the throttle grip
should be checked before each ride.
In addition, the cable should be lubri-
cated at the intervals specified in the
periodic maintenance chart.

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-19

1B9-F8199-E0.qxd  14/10/2005 11:07  Página 55

Summary of Contents for XMAX 125i 2005













































































Reviews:

No comments