manualshive.com logo in svg

Yamaha XMAX 125i 2005, Owner'S Manual, Page: 18 / 76

Share
Download
Yamaha XMAX 125i 2005 Owner'S Manual Download Page 18

EAU11590

Speedometer

1. Speedometer

The speedometer shows the riding
speed.

EAU12110

Fuel gauge

1. Fuel gauge
2. Fuel warning light

The fuel gauge indicates the amount
of fuel in the fuel tank. The needle
moves towards “E” (Empty) as the
fuel level decreases. When the needle
reaches “E”, approximately 2.0L (0.44
USgal) (1.76lmpgal) of fuel remain in
the fuel tank. If this occurs, refuel as
soon as possible.

NOTE:

Do not allow the fuel tank to empty
itself completely.

EAU12171

Coolant temperature gauge

1. Temperature gauge

With the key in the “ON” position, the
coolant temperature gauge indicates
the temperature of the coolant. The
coolant temperature varies with chan-
ges in the weather and engine load. If
the needle reaches or enters the red
zone, stop the vehicle and let the
engine cool. (See page 6-29.)

ECA10020

CAUTION:

Do not operate the engine if it is
overheated.

1

1

2

1

3

INSTRUMENT AND CONTROL FUNCTIONS

3-4

1B9-F8199-E0.qxd  14/10/2005 11:06  Página 3-4

Summary of Contents for XMAX 125i 2005













































































Reviews:

No comments