INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
Battery voltage level display
This display shows the battery voltage
from 10.1 Volt to 17.9 Volt in 0.1 V in-
crements.
The voltage displayed may vary from
the battery voltage. Pushing the “IN-
FO” button switches the ambient tem-
perature display to the battery voltage,
the average fuel consumption, the in-
stantaneous fuel consumption and av-
erage speed modes.
TIP
If the battery warning indicator “
”
flash and warning message indicate “H
BATT” or “L BATT”, have a Yamaha
dealer check the battery.
Average fuel consumption mode
The average fuel consumption display
can be set to either “Ave/Cons_ _._
km/L” or “Ave/Cons_ _._ L/100 km”
(except for the UK).
For the UK only:
The average fuel consumption is dis-
played “Ave/Cons_ _._ MPG”.
This display shows the average fuel
consumption since it was last reset.
When the display is set to
“Ave/Cons_ _._ km/L”, the aver-
age distance that can be traveled
on 1.0 L of fuel is shown.
When the display is set to
“Ave/Cons_ _._ L/100 km”, the av-
erage amount of fuel necessary to
travel 100 km is shown.
For the UK only: When the display
is set to “Ave/Cons_ _._ MPG”,
the average distance that can be
traveled on 1.0 Imp.gal of fuel is
shown.
To reset the average fuel consumption
display, select it by pushing the “INFO”
button, and then push and hold the
“INFO” button for 3 seconds.
TIP
After resetting an average fuel con-
sumption display, “_ _._” is shown for
that display until the vehicle has trav-
eled 1 km (0.6 mi).
Instantaneous fuel consumption mode
ZAUM1109
C H
km
Trip
ZAUM1110
C H
km
L/100km
Cons
Oil
km/L
ZAUM1111
C H
km
L/100km
Cons
Oil
km/L
U2DME1E0.book Page 11 Wednesday, October 23, 2013 1:37 PM
