Yamaha XLT800 WaveRunner 2004, Owner'S/Operator'S Manual, Page: 42 / 136

2-15
E
EJU01022
Quick Shift Trim System
(QSTS) selector
The QSTS selector
1
is located at the
left handlebar grip and is used to adjust the
trim angle of the watercraft.
Operating the QSTS selector changes the
angle of the jet thrust nozzle vertically. This
changes the trim angle of the watercraft.
There are 5 positions: 2 bow down posi-
tions
A
and
B
, neutral “N,” and 2 bow up
positions
C
and
D
.
To change the trim angle:
1. Reduce engine speed to 3,000 r/min or
less.
2. Squeeze the shift lock lever
2
, and then
turn the QSTS selector to the desired
position.
3. Release the shift lock lever to lock the
QSTS selector.
CAUTION:
@
Do not turn the QSTS selector while
operating the watercraft at full throttle,
otherwise damage could occur to the
QSTS.
@
The neutral “N” position will provide good
performance for most operating conditions.
To enhance particular types of perfor-
mance, select bow down or bow up.
UF1F12.book Page 15 Friday, May 30, 2003 11:15 AM