Yamaha XLT800 WaveRunner 2003, Owner'S/Operator'S Manual

Page: 54 / 140

2-25
E
EJU01163
Tripmeter
A tripmeter is provided for measuring the
approximate distance traveled.
To show the tripmeter, press the “MODE”
button until the display shows “TRIP” while
the engine is running. After showing “TRIP,”
the display turns to “.MILE.”
1. When the display shows “.MILE,” press
the “MODE” button for at least
2 seconds.
2. The buzzer will sound twice. The warn-
ing light and “.MILE” blink for 2 seconds,
and “000” is displayed. Now the meter
will start to measure the distance you
travel.
3. When the tripmeter begins measuring
the distance traveled, the “.” to the left of
“MILE” on the display will blink.
NOTE:
@
Measured distance may vary depending on
the water surface conditions, and wind direc-
tion. The measured distance should be used
for a reference.
@
EJU01232
Fuel warning indicator
If the fuel remaining in the tank drops to
about 17 L (4.5 US gal, 3.7 Imp gal), the
lowest fuel level segment, the fuel warning
indicator, “FUEL” and the warning light
begin to blink. The buzzer also starts sound-
ing intermittently.
UF1F11.book Page 25 Monday, June 10, 2002 11:54 AM