manualshive.com logo in svg

Yamaha Xenter HW151, Owner'S Manual

Share
Download
Yamaha Xenter HW151 Owner'S Manual Download Page 63

1

2

3

4

5

6

7

8

9

6-26

EAU1722A

PERIODIC MAINTENANCE AND ADJUSTMENT

NOTICE: When removing the 
battery, be sure the key is 
turned to “OFF”, then discon-
nect the negative lead before 
disconnecting the positive 
lead.

[ECA16302]

2.  If the battery will be stored for 

more than two months, check it 
at least once a month and fully 
charge it if necessary.

3.  Fully charge the battery before 

installing it. 

NOTICE: When in-

stalling the battery, be sure the 
key is turned to “OFF”, then 
connect the positive lead be-
fore connecting the negative 
lead.

[ECA16840]

4.  After installing the battery, make 

sure that the battery leads are 
properly connected to the battery 
terminals.

5.  Turn the key from “ON” to “OFF” 

three times in three-second in-
tervals to initialize the idle speed 
control system.

manently damage the battery.

The battery is located behind panel A. 
Remove the panel to access the bat-
tery. (See page 6-7.)

To charge the battery

Have a Yamaha dealer charge the 
battery as soon as possible if it seems 
to have discharged. Keep in mind that 
the battery tends to discharge more 
quickly if the vehicle is equipped with 
optional electrical accessories.

ECA16521

NOTICE

To charge a VRLA (Valve Regu-
lated Lead Acid) battery, a special 
(constant-voltage) battery charger 
is required. Using a conventional 
battery charger will damage the 
battery.

To store the battery

1.  If the vehicle will not be used for 

more than one month, remove 
the battery, fully charge it, and 
then place it in a cool, dry place. 

always shield your eyes when 
working near batteries. In case 
of contact, administer the fol-
lowing FIRST AID.

•

  EXTERNAL: Flush with plen-

ty of water.

•

  INTERNAL: Drink large quan-

tities of water or milk and im-
mediately call a physician.

•

  EYES: Flush with water for 

15 minutes and seek prompt 
medical attention.

● 

Batteries produce explosive 
hydrogen gas. Therefore, keep 
sparks, fl ames, cigarettes, etc., 
away from the battery and pro-
vide suffi cient ventilation when 
charging it in an enclosed 
space.

● 

KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF 
CHILDREN.

ECA10620

NOTICE

Never attempt to remove the bat-
tery cell seals, as this would per-

52S-F8199-E0_CS.indd   6-26

52S-F8199-E0_CS.indd   6-26

2011/11/16   13:07:02

2011/11/16   13:07:02

Process Black

Process Black

Summary of Contents for Xenter HW151





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands