PERIODIC MAINTENANCE AND ADJUSTMENT
7-17
2
3
4
5
6
7
8
9
face and let the engine cool if nec-
essary.
2. Remove panels A and C. (See
3. Place a container under the engine
to collect the used coolant.
4. Remove the radiator cap retaining
bolt and radiator cap.
WARNING!
Never attempt to remove the ra-
diator cap when the engine is
hot.
[EWA10381]
5. Remove the coolant reservoir by
removing the bolts.
6. Remove the coolant reservoir cap.
7. Drain the coolant from the coolant
reservoir by turning it upside down.
8. Install the coolant reservoir by
placing it in the original position,
and then installing the bolts.
9. Remove the coolant drain bolt and
its gasket to drain the cooling sys-
tem.
10. After the coolant is completely
drained, thoroughly flush the cool-
ing system with clean tap water.
11. Install the coolant drain bolt and its
new gasket, and then tighten the
bolt to the specified torque.
12. Pour the specified amount of the
recommended coolant into the ra-
1. Radiator cap
2. Radiator cap retaining bolt
2
1
1. Bolt
2. Coolant reservoir
1. Coolant reservoir cap
1
2
1
1. Coolant drain bolt
2. Gasket
Tightening torque:
Coolant drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
1
2
32C-9-18.book 17 ページ ２０１１年７月６日 水曜日 午後５時５５分
