manualshive.com logo in svg

Yamaha Wolverine YX70EPNG, Owner'S Manual, Page: 33 / 182

Share
Download
Yamaha Wolverine YX70EPNG Owner'S Manual Download Page 33

4-2

4

EBU31260

Indicator lights and warning lights

EBU31270

Low-range indicator light “L”

This indicator light comes on when the drive
select lever is in the “L” position.

EBU31280

High-range indicator light “H”

This indicator light comes on when the drive
select lever is in the “H” position.

1. On-Command differential gear lock indicator light “DIFF. 

LOCK”

2. Low-range indicator light “L”
3. High-range indicator light “H”
4. Neutral indicator light “N”
5. Reverse indicator light “R”
6. Parking brake indicator light “

”

7. On-Command four-wheel-drive/differential gear lock 

indicator “

”/“

”

8. Engine trouble warning light “

”

9. Coolant temperature warning light “

”

10.Electric Power Steering warning light “EPS”

3

5

6

4

2

1

7

8

10

9

1. Helmet indicator light “

”

2. Seat belt indicator light “

”

2

1

U2MB70E0.book  Page 2  Thursday, January 22, 2015  8:54 AM

Summary of Contents for Wolverine YX70EPNG























































































































































































Reviews:

No comments