manualshive.com logo in svg

Yamaha Wolverine YX70EPNG, Owner'S Manual, Page: 135 / 182

Share
Download
Yamaha Wolverine YX70EPNG Owner'S Manual Download Page 135

8-31

8

and erode. If electrode erosion becomes ex-
cessive, or if carbon and other deposits are
excessive, you should replace the spark plug
with the specified plug.

Measure the spark plug gap with a wire thick-
ness gauge and, if necessary, adjust the gap
to specification.

Installation

1. Clean the surface of the spark plug gas-

ket and its mating surface, and then wipe
off any grime from the spark plug
threads.

2. Install the spark plug and tighten it to the

specified torque. If a torque wrench is not
available when you are installing the
spark plug, a good estimate of the cor-
rect torque is one-quarter to one-half turn
past finger tight. Have the spark plug
tightened to the specified torque as soon
as possible.

3. Install the spark plug cap.

Specified spark plug:

NGK/CPR7EA-9

1. Spark plug gap

1

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

Tightening torque:

Spark plug:

11 Nm (1.1 m·kgf, 8.0 ft·lbf)

U2MB70E0.book  Page 31  Thursday, January 22, 2015  8:54 AM

Summary of Contents for Wolverine YX70EPNG























































































































































































Reviews:

No comments