background image

7-8

7

EBU31930

Parking

When parking, stop the engine and shift the
drive select lever into the neutral position. Ap-
ply the parking brake to help prevent the ve-
hicle from rolling. See page 8-14 for more
information on parking and parking on a
slope.

EBU31942

Loading

Take extra precautions when driving with a
load or trailer. Follow these instructions and
always use common sense and good judg-
ment when carrying cargo or towing a trailer.

Prepare your load or trailer

Use the hooks equipped on the cargo bed to
tie down loads. (See page 5-29.)
Choose a trailer hitch drawbar designed for
use with a 2" (5 cm) receiver. (See page 5-35.)

WARNING

EWB04260

Improper loading or towing can increase
the risk of loss of control, an overturn, or
other accident:

Keep weight in the cargo bed centered
side to side, and as low and as far for-
ward as possible. Top-heavy loads in-
crease the risk of overturn. Be sure
cargo is secured — a loose load could
change handling unexpectedly or strike
occupants.

Be sure to tie down cargo in the trailer
securely — a shifting load can cause an
accident.

Make sure the load does not interfere
with your control or ability to see where
you are going.

Do not exceed the Maximum Load Limits
for each section of the vehicle or the
Maximum Vehicle Load.

 

UB4M11E0.book  Page 8  Tuesday, August 4, 2020  1:04 PM

Summary of Contents for WOLVERINE R MAX 2021































































































































































































Reviews: