Yamaha WaveRunner XL XL700Y Owner'S/Operator'S Manual Download | Manualshive

Page: 36 / 105

background image

E

2-12

F0M059

q

F0M060

w

e

GU20605

EJU00909

STORAGE COMPARTMENTS

The storage compartment(s) is provided
to store the manuals, tools, and other
equipment for cruising.
Make sure all storage compartments are
firmly secured before riding.

NOTE:

The storage compartment(s) is not
designed to be waterproof. If you put the
manuals in the compartment(s), store
them in a waterproof bag to protect them
from water damage.
If your owner’s manual becomes dam-
aged, order a replacement from a
Yamaha water vehicle dealer.

Front storage compartments

Two storage compartments are provided
under the front hood.

8

Opening

Pull up the latch lever to open the front
hood. Remove the upper storage com-
partment to access the lower storage
compartment.

1

Latch lever

2

Upper storage compartment:
Capacity: 44.4 L (4.4 US gal, 3.6 Imp gal)
Load limit: 5 kg (11.0 lb)

3

Lower storage compartment:

c

C

Store only soft, light weight things, such
as rope or rags, in the lower storage com-
partment. Storing hard or heavy things,
such as tools or cans, may break the
compartment.

«
...
34
35
36
37
38
...
»

Summary of Contents for WaveRunner XL XL700Y










































































































Reviews:

No comments

Related manuals for WaveRunner XL XL700Y

Brand: Native Watercraft Pages: 6

Spartan 57076-1

Brand: Traxxas Pages: 30

Brand: NorthStar Pages: 2

Brand: NorthStar Pages: 2

Brand: Highfield Pages: 34

Brand: Coastal Pages: 16

WaveRunner GP800R

Brand: Yamaha Pages: 24

Brand: Yamaha Pages: 110

WaveRunner V1 2016

Brand: Yamaha Pages: 104

WaveRunner GP1800 2017

Brand: Yamaha Pages: 106

WaveRunner SUV SV1200X

Brand: Yamaha Pages: 125

Explorer 14.6 DLX

Brand: Pelican Pages: 10

Brand: Mercury Pages: 86

Brand: S/C Yachts Pages: 10

Brand: Trophy Pages: 64

Brand: Gumotex Pages: 52

WaveRunner FZR 2012

Brand: Yamaha Pages: 104

Brand: San Juan Yachting Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands