Yamaha WaveRunner VX Deluxe 2007 Owner'S/Operator'S Manual Download Page 45

Page: 45 / 96

Features and functions

ridden normally when this light is on. (See
page 32 for more information.)

EJU35010

“L-MODE” indicator light (for VX Deluxe/
VX Cruiser)

The “L-MODE” indicator light comes on when
the low-RPM mode is selected. (See page 33
for more information.)

EJU31680

Storage compartments

A front storage compartment and a glove
compartment are provided.

NOTE:

●

Make sure that the storage compartments
are securely closed before operating the
watercraft.

●

The storage compartments are not de-
signed to be waterproof. If you carry objects
that must be kept dry, such as the manuals,
put them in a waterproof bag.

EJU31711

Front storage compartment

The front storage compartment is located at
the bow.
To open the front storage compartment, pull
the hood latch up, and then lift up the hood.

“SECURITY” indicator light

“L-MODE” indicator light

Hood latch

Front storage compartment

UF1K72E0.book Page 38 Wednesday, August 2, 2006 10:43 AM

Summary of Contents for WaveRunner VX Deluxe 2007

































































































Search results

Summary of Contents for WaveRunner VX Deluxe 2007

Reviews:

Related manuals for WaveRunner VX Deluxe 2007

Brands by name

Popular brands

Yamaha WaveRunner VX Deluxe 2007, Owner'S/Operator'S Manual

Search results

Summary of Contents for WaveRunner VX Deluxe 2007

Reviews:

Related manuals for WaveRunner VX Deluxe 2007

Brands by name

Popular brands