Operation
66
is attached correctly. If the engine
shut-off cord (lanyard) is not attached
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident.
[EWJ00581]
(4) With the throttle lever released, push the
start switch (green button) to start the en-
gine. (See page 27 for information on op-
erating the start switch.)
EJU32862
Stopping the engine
Release the throttle lever, and then push the
engine stop switch (red button) to stop the en-
gine.
WARNING! You need throttle to steer.
Shutting the engine off can cause you to
hit an obstacle you are attempting to
avoid. A collision could result in severe in-
jury or death.
[EWJ00601]
EJU32872
Leaving the watercraft
If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acciden-
tal starting or unauthorized operation by chil-
dren or others.
EJU40221
Operating the watercraft
When the shift lever is in the forward position
and the engine is running, the watercraft will
move forward. The watercraft will move for-
ward at trolling speed even if the throttle lever
1
Clip
2
Engine shut-off switch
3
Engine shut-off cord (lanyard)
1
2
3
UF2R51E0.book Page 66 Wednesday, June 22, 2011 1:38 PM
Summary of Contents for WaveRunner FZR 2012
Page 11: ...General and important labels 6 UF2R51E0 book Page 6 Wednesday June 22 2011 1 38 PM ...
Page 13: ...General and important labels 8 UF2R51E0 book Page 8 Wednesday June 22 2011 1 38 PM ...
Page 103: ...UF2R51E0 book Page 3 Wednesday June 22 2011 1 38 PM ...
Page 104: ...Printed in U S A August 2011 0 2 1 CR UF2R51E0 book Page 1 Wednesday June 22 2011 1 38 PM ...