background image

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

 WARNING

Always follow the basic precautions listed below to avoid the possibility of 
serious injury or even death from electrical shock, short-circuiting, damages, 
fire or other hazards. These precautions include, but are not limited to, the 
following:

• This device contains no user-serviceable parts. Do not open the device or attempt 

to disassemble the internal parts or modify them in any way. If it should appear to 
be malfunctioning, discontinue use immediately and have it inspected by qualified 
Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet conditions, or 

place on it any containers (such as vases, bottles or glasses) containing liquids 
which might spill into any openings. If any liquid such as water seeps into the 
device, have the device inspected by qualified Yamaha service personnel.

 CAUTION

Always follow the basic precautions listed below to avoid the possibility of 
physical injury to you or others, or damage to the device or other property. 
These precautions include, but are not limited to, the following:

• Do not place the device in an unstable position where it might accidentally fall over.

• Do not place the device in a location where it may come into contact with corrosive 

gases or salt air. Doing so may result in malfunction.

• Construction work should be carried out in accordance with construction-related 

law and always by a professional constructor. If the device installation requires 
construction work, make sure to observe the following precautions.

- Choose mounting hardware and an installation location that can support the 

weight of the device.

- Avoid locations that are exposed to constant vibration.

- Use the required tools to install the device.

- Inspect the device periodically.

• When transporting or moving the device, always use two or more people. 

Attempting to lift the device by yourself may damage your back, result in other 
injury, or cause damage to the device itself.

• Before connecting the device to a power amplifier, turn off the power for all devices. 

Before turning the power on or off for all devices, set all volume levels to minimum.

• Use only speaker cables for connecting speakers to the speaker connectors. Use of 

other types of cables may result in fire.

• Do not wipe the outer packaging with benzine, thinner, or synthetic detergent and 

do not use electrical contact cleaner. These may damage the outer packaging and 
dissolve the parts.

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into holes of 

the grille. If this happens, have the device inspected by qualified Yamaha service 
personnel.

• Do not operate the device if the sound is distorting. Prolonged use in this condition 

could cause overheating and result in fire.

• When choosing a power amplifier for use with this device, make sure that the output 

power of the amplifier is lower than the power capacity of this device (see 
SPECIFICATIONS).
Even if the output power of the amplifier is lower than the power capacity of this 
device (PGM), use of excessive input signals resulting in clipping may cause 
damage to the device. 
Malfunction or fire may occur especially when the following sounds or noises are 
generated:

- feedback, when using a microphone

- continuous and extreme volume sound from a musical instrument

- extreme continuous distorted sound

- noise caused by plugging/unplugging the cable while the amplifier is turned on

PRECAUTIONS

Do not open

Water warning

Location

Connections

Maintenance

Handling caution

NOTICE

To avoid the possibility of malfunction/damage to the product or damage to other 
property, follow the notices below.

Ɣ

Handling and Maintenance

• Do not place vinyl, plastic or rubber objects on the device, since this might discolor 

the cabinet.

• When cleaning the device, use a dry and soft cloth. Do not use paint thinners, 

solvents, cleaning fluids, or chemical-impregnated wiping cloths.

• Condensation can occur in the device due to rapid, drastic changes in ambient 

temperature-when the device is moved from one location to another, or air 
conditioning is turned on or off, for example. Using the device while condensation is 
present can cause damage. If there is reason to believe that condensation might 
have occurred, leave the device for several hours until the condensation has 
completely dried out.

• Be sure to observe the amplifier’s rated load impedance (see SPECIFICATIONS), 

particularly when connecting speakers in parallel. Connecting an impedance load 
outside the amplifier’s rated range can damage the amplifier.

• When connecting the speakers with high impedance, be sure that the output total of 

each speaker does not exceed the rated output of the power amplifier.

• ABOUT THE PROTECTION CIRCUIT

This speaker system has an internal protection circuit that shuts off the speaker unit 
when an excessive input signal is applied.
If the speaker unit emits no sound, reduce the volume level of the amplifier 
immediately. 
The sound will return automatically in several seconds.

• Place the speaker on a flat and smooth surface.

Ɣ

About This Manual

The illustrations as shown in this manual are for instructional purposes only, and may 
appear somewhat different from those on your device.

Yamaha cannot be held responsible for damage caused by improper use or 
modifications to the device.

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying 
documents means that used electrical and electronic products 
should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please 
take them to applicable collection points, in accordance with your 
national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save 
valuable resources and prevent any potential negative effects on 

human health and the environment which could otherwise arise from inappropriate 
waste handling.

For more information about collection and recycling of old products, please contact 
your local municipality, your waste disposal service or the point of sale where you 
purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer 
or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, 
please contact your local authorities or dealer and ask for the correct method of 
disposal.

Owner’s Manual

Surface Mount Speaker

English

ZG14070

EN

Summary of Contents for VXS10S










Reviews: