Yamaha VX250B, Owner'S Manual

Page: 35 / 124

E
2-12
000331
TRIP TIME BATT
Km/h
knot
mph
km
mile
SPEED
YAMAHA
set
mode
EMU01274
Trip Meter
This meter displays the distance the boat
has traveled since the meter was last reset.
Repeatedly push and release the “mode”
button until the indicator on the face of the
meter points to “TRIP”. To reset the trip
meter to “0”, press the “set” and “mode” but-
ton together.
NOTE:
8
The trip distance is shown in kilometers
or miles depending upon the unit of mea-
surement selected for the speedometer.
8
The trip distance is kept in memory by
battery power. The stored data will be lost
if the battery is disconnected.
000332
TRIP TIME BATT
Km/h
knot
mph
km
mile
SPEED
YAMAHA
set
mode
EMU01275
Clock
This meter shows the current time.
Repeatedly push and release the “mode”
button until the indicator on the face of the
meter points to “TIME.” To set the clock, be
sure the meter is in the “TIME” mode. Press
the “set” button; the hour display will begin
blinking. Press the “mode” button until the
desired hour is displayed. Press the “set”
button again, the minute display will begin
blinking. Press the “mode” button until the
desired minute is displayed. Press the “set”
button again to start the clock.
NOTE:
The clock operates on battery power.
Disconnecting the battery will stop the
clock. Reset the clock after connecting the
battery.
69L-9-12-2 3/5/02 5:01 PM Page 13