Yamaha VP1, Performance Notes

Page: 23 / 67

B
04
No.
B04(20)
Voice Name
OEns:
SlowStrs
EL1: SlowStrs EL2: -
EL3: - EL4: -
Comment
Analog synth pad with slow attack
Notes
Scene (Foot) Initial Scene No. = 2 1 No fundamental 2 Normal 3 Modulation
Element1 Element2 Element3 Element4
Param1 (MW1) VibDepth - - - Vibrato depth
Param2 (MW2) Stiffness1 - - - Fine brightness control
Param3 (FC1) HarmVol - - - Coarser brightness control
Param4 (FC2) Stiffness2 - - - Basic change in harmonic structure
Param5 (MBx) - - - -
Param6 (MBy) - - - -
Param7 (CS1) Spectrum - - - Higher harmonics
Param8 (CS2) Squeak - - - Continuous movement produces flanging effect
Param9 (BC) - - - -
Param10(VEL) Stress - - - Stress
Param11(AT) - - - -
Param12(PB) - - - -
Param13(TEG) - - - -
Sustain Enable OFF - - -
Portamento OFF - - -
Max Notes 16 - - -
Microtuning Equal̲(off) - - -
Effect Type Reverb Hall
Synth string with slow attack. Try adjusting the Quick Edit EG parameters.
Continuous sliding of CS2 and MW2 produces a flanging modulation effect. (The CS2 effect is more obvious.)
The CS1 spectral effect is obtained by phase change rather than by low-pass filter.
Most controller movements leave the essential sound intact. But try depressing FC2 all the way and then sliding
CS2 continuously to get the sound of gas from a pipe. Then hold this sound with the sustain pedal while operating
Performance various controllers.
Hints