Yamaha VMAX VMX17 Owner'S Manual Download Page 72

Page: 72 / 112

PERIODIC MAINTENANCE AND ADJUSTMENT

6-17

3. If the coolant is at or below the

minimum level mark, remove the
coolant reservoir cap guard by re-
moving the bolt, and then remove
the reservoir cap.

WARNING! Re-

move only the coolant reservoir
cap. Never attempt to remove
the ra

iator cap when the en-

ine is hot.

[EWA15162]

4. Add coolant to the maximum level

mark, and then install the reservoir
cap.

NOTICE:

If coolant is not

availa

le, use

istille

water or

soft tap water instea

. Do not

use har

water or salt water

since it is harmful to the en

ine.

If water has

een use

instea

of coolant, replace it with cool-
ant as soon as possi

le, other-

wise the coolin

system will not

e protecte

ainst frost an

corrosion. If water has

een

to the coolant, have a

Yamaha

ealer check the anti-

freeze content of the coolant as
soon as possi

le, otherwise the

effectiveness of the coolant will

e re

uce

[ECA10473]

5. Install the coolant reservoir cap

guard by installing the bolt.

EAU46426

To chan

e the coolant

1. Place the vehicle on a level sur-

face and let the engine cool if nec-
essary.

2. Remove cowling A. (See page

6-8.)

3. Remove the right air intake duct

by removing the bolts.

4. Place a container under the en-

gine to collect the used coolant.

5. Remove the radiator cap.

WARNING! Never attempt to re-
move the ra

iator cap when the

ine is hot.

[EWA10382]

1. Coolant reservoir cap
2. Coolant reservoir cap guard
3. Bolt
4. Maximum level mark
5. Minimum level mark

Coolant reservoir capacity (up to
the maximum level mark):

0.27 L (0.29 US qt, 0.24 Imp.qt)

1. Bolt
2. Right air intake duct

U2CEE0E0.book Page 17 Wednesday, August 27, 2014 11:11 AM

Summary of Contents for VMAX VMX17

















































































































Search results

Summary of Contents for VMAX VMX17

Reviews:

Yamaha VMAX VMX17, Owner'S Manual, Page: 72 / 112

Search results

Summary of Contents for VMAX VMX17

Reviews: