manualshive.com logo in svg

Yamaha VMAX VMX17, Owner'S Manual, Page: 30 / 112

Share
Download
Yamaha VMAX VMX17 Owner'S Manual Download Page 30

INSTRUMENT AND CONTROL FUNCTIONS

3-15

3

mode again by pushing and holding
“SELECT” and “RESET” for at least
three seconds.

Checking and resetting the system sta-
tus
The status/readings of the following
items are displayed, and the tripmeters
can be reset.

tripmeters and odometer

fuel consumption

air intake temperature

throttle opening position

TIP

The “System status” menu cannot
be entered if the fuel level warning
light or coolant temperature warn-
ing light is on.

If, when the engine is running
while the system status menu is
displayed, the fuel level warning
light or coolant temperature warn-
ing light comes on, the Normal
mode is automatically displayed.

1. Push “SELECT” to highlight “Sys-

tem status”, then push “RESET”.

2. Push “SELECT” to highlight

“Yes”, then push “RESET”. (High-
lighting “No” and pushing “RE-
SET” returns to the previous
menu.)

The display changes to the status
screen.

Push “SELECT” and the various trip-
meters and the odometer are dis-
played in the following order:
(TRIP-F) 

→

 TRIP-1 

→

 TRIP-2 

→

 ODO

→

 (TRIP-F)

Push “RESET” to reset a tripmeter.

TIP

For the UK only: Push “SELECT”
for at least two seconds to switch
between kilometers and miles.

1. Odometer/tripmeter/fuel reserve tripmeter
2. Clock
3. Instantaneous fuel consumption
4. Throttle opening position display
5. Transmission gear indicator
6. Air intake temperature display

1

2

3

6

5

4

U2CEE0E0.book  Page 15  Wednesday, August 27, 2014  11:11 AM

Summary of Contents for VMAX VMX17

















































































































Reviews:

No comments