31
Getting Started
●
Setting Up
Setting Up
4.
Select “Load From Disk”
Use the cursor buttons to move the cursor to “
2:Load From Disk
” and then
press
[
.
5.
Select “All” and Select the “001:NOBREATH:ALL” File
Make sure the cursor is positioned at “
1:All
” and press
[
.
When the list of files appears select the “
001:NOBREATH:ALL
” file, then press
[
again.
NOTES
■
The “001:NOBREATH:ALL” file contains voices that are programmed to
be played without a breath controller. If you will be using a breath controller or
MIDI Wind Controller you might want to load one of the other files supplied on
the VL1-m data disk: see “About the VL1-m Data Disk”, below.
6.
Load the File
Loading will begin when you press the
-
button in response to the “
Are You
Sure?
” prompt. A bar graph on the display will indicate the progress of the load opera-
tion, and when all the data has been loaded “
Completed!
” will appear.
