PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
NOTE:
The engine oil should be between the
minimum and maximum level marks.
4. If the engine oil is below the mini-
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
To change the engine oil (with or
without oil filter element replace-
ment)
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
Skip steps 4–6 if the oil filter element is
not being replaced.
4. Remove the oil filter element cover
by removing the bolts.
5. Remove and replace the oil filter
element and O-ring.
1. Engine oil level check window
2. Maximum level mark
3. Minimum level mark
1. Engine oil filler cap
1. Engine oil drain bolt
1. Bolt
2. Oil filter element cover
U2UJ1EE0.book Page 11 Thursday, May 12, 2005 4:04 PM
Summary of Contents for VIRAGO XV250V
Page 1: ...2UJ 28199 1E XV250V XV250VC OWNER S MANUAL LIT 11626 19 23 ...
Page 2: ...EAU10041 U2UJ1EE0 book Page 1 Thursday May 12 2005 4 04 PM ...
Page 91: ...CONSUMER INFORMATION 9 8 9 U2UJ1EE0 book Page 8 Thursday May 12 2005 4 04 PM ...
Page 96: ...PRINTED IN JAPAN 2005 05 0 3 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...
