INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
EAU12410
Dimmer switch “LIGHTS”
Set the switch to “HI” for the high beam
and to “LO” for the low beam.
EAU12440
Turn signal switch “TURN”
To signal a right-hand turn, push this
switch to the right. To signal a left-hand
turn, push this switch to the left. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12510
Horn switch “HORN”
Press this switch to sound the horn.
EAU12650
Engine stop switch “ENGINE STOP”
Set this switch to “RUN” before starting
the engine. Set this switch to “OFF” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12690
Start switch “START”
Push this switch to crank the engine
with the starter.
CAUTION:
ECA10050
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12820
Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-11.)
1. Clutch lever
U2UJ1EE0.book Page 3 Thursday, May 12, 2005 4:04 PM
Summary of Contents for VIRAGO XV250V
Page 1: ...2UJ 28199 1E XV250V XV250VC OWNER S MANUAL LIT 11626 19 23 ...
Page 2: ...EAU10041 U2UJ1EE0 book Page 1 Thursday May 12 2005 4 04 PM ...
Page 91: ...CONSUMER INFORMATION 9 8 9 U2UJ1EE0 book Page 8 Thursday May 12 2005 4 04 PM ...
Page 96: ...PRINTED IN JAPAN 2005 05 0 3 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...