PERIODIC MAINTENANCE AND MINOR REPAIR
6-12
6
6. Install the oil filter element cover by
installing the bolts, then tightening
them to the specified torque.
NOTE:
Make sure that the O-ring is properly
seated.
7. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
8. Add the specified amount of the
recommended engine oil, and then
install and tighten the oil filler cap.
CAUTION:
ECA11620
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of “CD” or oils of a high-
er quality than specified. In
addition, do not use oils labeled
“ENERGY CONSERVING II” or
higher.
●
Make sure that no foreign mate-
rial enters the crankcase.
9. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking, im-
mediately turn the engine off and
check for the cause.
10. Turn the engine off, and then
check the oil level and correct it if
necessary.
1. Oil filter element
2. O-ring
Tightening torque:
Oil filter element cover bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Tightening torque:
Engine oil drain bolt:
34 Nm (3.4 m·kgf, 25 ft·lbf)
Recommended engine oil:
See page 8-1.
Oil quantity:
With oil filter element replacement:
1.60 L (1.69 US qt) (1.41 Imp.qt)
Without oil filter element replace-
ment:
1.40 L (1.48 US qt) (1.23 Imp.qt)
U2UJ1DE0.book Page 12 Thursday, May 13, 2004 11:59 PM
Summary of Contents for VIRAGO XV250T
Page 1: ...2UJ 28199 1D LIT 11626 18 21 XV250T XV250TC OWNER S MANUAL ...
Page 2: ...EAU10041 U2UJ1DE0 book Page 1 Thursday May 13 2004 11 59 PM ...
Page 90: ...CONSUMER INFORMATION 9 8 9 U2UJ1DE0 book Page 8 Thursday May 13 2004 11 59 PM ...
Page 95: ...PRINTED IN JAPAN 2004 05 0 6 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...
