Yamaha Virago XV125S, Owner'S Manual

Page: 69 / 88

1
2
3
4
5
6
7
8
9
6-36
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU00862
Supporting the motorcycle
Since the Yamaha XV125S has no
centerstand, follow these precau-
tions when removing the front and
rear wheel or performing other
maintenance requiring the motor-
cycle to stand upright.
Front wheel service
To stabilize the rear of the motor-
cycle, either use a motorcycle
stand or place a motorcycle jack
under the frame in front of the rear
wheel to prevent it from moving
from side to side. Then use a
motorcycle stand to elevate the
front wheel off of the ground.
Rear wheel service
Use a motorcycle stand or motor-
cycle jack to elevate the motorcycle
so the rear wheel is off the ground.
Alternatively, two jacks can be
placed under the frame or
swingarm.
Check that the motorcycle is in a
stable and level position before
starting any maintenance. A strong
wooden box can be placed under
the engine for added stability.
1
EAU00894
Front wheel removal
EW000122
w
8
It is advisable to have a
Yamaha dealer service the
wheel.
8
Securely support the motorcy-
cle so there is no danger of it
falling over.
1. Remove the speedometer
cable from the front wheel
side.
1. Speedometer cable
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 67