Yamaha VINO YJ50RAP, Service Manual

Page: 209 / 228

7 - 32
– +
ELEC
EAS00796
CHECKING THE SIGNALING SYSTEM
1. The horn fails to sound.
YES
NO
YES NO
NO
YES
1. Horn switch
• Check the horn switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the horn switch OK?
Replace the left han-
dlebar switch.
2. Voltage
• Connect the pocket tester (DC 20 V) to the
horn connector at the horn terminal as
shown.
Positive tester probe
→
brown
1
Negative tester probe
→
ground
• Set the main switch to “ON”.
• Push the horn switch.
• Measure the voltage (12 V) of brown at the
horn terminal.
• Is the voltage within specification?
The wiring circuit
from the main switch
to the horn connec-
tor is faulty and must
be repaired.
3. Horn
• Disconnect the pink connector at the horn
terminal.
• Connect a jumper lead
1
to the horn ter-
minal and ground the jumper lead.
• Set the main switch to “ON”.
• Push the horn switch.
• Does the horn sound?
The horn is OK.
SIGNALING SYSTEM
Downloaded
from www.ScooterTime.net