Yamaha VINO YJ50RAP, Service Manual, Page: 107 / 228

4 - 19
CHAS
HANDLEBAR
EAS00666
REMOVING THE HANDLEBAR
1. Stand the scooter on a level surface.
WARNING
@
Securely support the scooter so that there
is no danger of it falling over.
2. Remove:
• handlebar grip
1
NOTE:
@
Blow compressed air between the handlebar
and the handlebar grip, and gradually push the
grip off the handlebar.
1
EAS00668
CHECKING THE HANDLEBAR
1. Stand the scooter on a level surface.
WARNING
@
Securely support the scooter so that there
is no danger of it falling over.
2. Check:
• handlebar
1
Bends/cracks/damage
→
Replace.
WARNING
@
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken it.
3. Install:
• handlebar grip
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Apply a thin coat of rubber adhesive onto
the left end of the handlebar.
b. Slide the handlebar grip over the left end of
the handlebar.
c. Wipe off any excess rubber adhesive with a
clean rag.
WARNING
@
Do not touch the handlebar grip until the
rubber adhesive has fully dried.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
1
Downloaded
from www.ScooterTime.net