Yamaha VINO XC50W Owner'S Manual Download Page 25

Page: 25 / 80

3-9

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder<IXE>

Storage compartment (front)<IXE>

To release the helmet from the hel-
met holder

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

EAU14400

Front storage compartment

ZAUM00**

1. Front storage compartment

EWA11190

Do not exceed the load limit of
1.5 kg (3 lb) for the front storage
compartment.

Do not exceed the maximum
load of 77 kg (170 lb) for the ve-
hicle.

EAU14300

Helmet holder

ZAUM00**

1. Helmet holder

The helmet holder is located under the
seat.

To secure a helmet to the helmet
holder

1. Open the seat. (See page 3-8.)
2. Attach the helmet to the helmet

holder, and then securely close the
seat.

EWA10160

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.

3D1-F8199-11ch3SGML.pmd

2006/08/17, 18:14

Summary of Contents for VINO XC50W

















































































Search results

Summary of Contents for VINO XC50W

Reviews:

Related manuals for VINO XC50W

Brands by name

Popular brands

Yamaha VINO XC50W, Owner'S Manual

Search results

Summary of Contents for VINO XC50W

Reviews:

Related manuals for VINO XC50W

Brands by name

Popular brands