8-49
8
9
10
11
12
13
14
NOTICE
To prevent accidental short-circuiting,
turn off the main switch when checking or
replacing a fuse.
2. Remove the hood. (See page 8-7 for
hood removal and installation proce-
dures.)
3. Remove the blown fuse, and then install
a new fuse of the specified amperage.
WARNING! Always use a fuse of the
specified amperage. Never use any
material in place of the proper fuse.
Using an improper fuse can cause
damage to the electrical system and
may lead to a fire.
4. Turn the key to “
” (on) and turn on the
electrical circuit in question to check if the
device operates. If the fuse blows again
immediately, have a Yamaha dealer
check the electrical system.
5. Install the hood.
Specified fuses:
Main fuse:
40.0 A
Fuel injection system fuse:
10.0 A
Headlight fuse:
15.0 A
Ignition fuse:
10.0 A
Auxiliary DC jack fuse:
10.0 A
Signaling system fuse:
10.0 A
Four-wheel-drive motor
fuse:
10.0 A
Radiator fan fuse:
25.0 A
Backup fuse:
10.0 A
EPS fuse:
40.0 A
1XP7A_EE.book Page 49 Friday, June 14, 2013 2:30 PM
