manualshive.com logo in svg

Yamaha Viking YXM700E, Owner'S Manual

Share
Download
Yamaha Viking YXM700E Owner'S Manual Download Page 73

6-5

6

EBU31922

On-Command drive knob

The vehicle handles differently in each of the drive modes (“2WD”, “4WD” and “DIFF LOCK”). For
example, the vehicle requires more effort to turn in “DIFF LOCK” than in “2WD”. Always stop the
vehicle before changing the position of the On-Command drive knob. The meter display changes
according to the selected drive mode. The different drive indicators, and the differential gear lock
indicator light “DIFF. LOCK” come on as follows:

Knob position

Indication

Drive mode

No indicator light.

“2WD” (two-wheel drive): Power is supplied to the rear 
wheels.

“4WD” (four-wheel drive): Power is supplied to the rear and 
front wheels.

“DIFF LOCK” (four-wheel drive with the differential gear 
locked): Power is supplied to the rear and front wheels and 
the differential gear is locked.
Unlike in four-wheel drive, all wheels turn at the same 
speed.

UB5F7AE0.book  Page 5  Tuesday, March 28, 2017  12:02 PM

Summary of Contents for Viking YXM700E













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands