PERIODIC MAINTENANCE AND MINOR REPAIR
6-31
6
9. Place the ignitor unit panel in the
original position and install the
quick fasteners.
NOTE:
_
To install a quick fastener, push its pin
back so that it will protrude from the
fastener head, then insert the fastener
and push the protruding pin in until it is
flush with the fastener head.
_
10. Install the rider seat.
EAU04189
Replacing the headlight bulb
This motorcycle is equipped with a
quartz bulb headlight. If the headlight
bulb burns out, replace it as follows.
1. Remove the headlight unit by re-
moving the screws.
2. Disconnect the headlight coupler,
and then remove the bulb cover.
3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
EW000119
WARNING
_
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
_
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
1. Quick fastener
2. Pin
After removal
Before installation
1. Screw (
×
2)
1. Headlight bulb holder
U5PB12.book Page 31 Wednesday, May 29, 2002 3:57 PM
Summary of Contents for V-Star XVS1100R
Page 2: ...EAU03438...
Page 97: ...SPECIFICATIONS 8 Specifications 8 1 U5PB12 book Page 1 Wednesday May 29 2002 3 57 PM...
Page 111: ...CONSUMER INFORMATION 9 8 9 U5PB12 book Page 8 Wednesday May 29 2002 3 57 PM...
Page 113: ...CONSUMER INFORMATION 9 10 9 U5PB12 book Page 10 Wednesday May 29 2002 3 57 PM...