–20–
FRONT WHEEL AND BRAKE DISCS
CHAS
WARNING
NOTE:
3. Measure:
S
front wheel radial runout
1
S
front wheel lateral runout
2
Over the specified limits
!
Replace.
Front wheel radial runout limit
1.0 mm (0.04 in)
Front wheel lateral runout limit
0.5 mm (0.02 in)
4. Check:
S
collars
Damage / wear
!
Replace.
S
New tires have a relatively low grip on the
road surface until they have been slightly
worn.
Therefore, approximately 100 km (62 mi)
should be traveled at normal speed before
any highspeed riding is done.
5. Check
S
wheel bearings
Front wheel turns roughly or is loose
!
Re-
place the wheel bearings.
S
oil seals
Damage / wear
!
Replace.
6. Replace:
S
wheel bearings
New
S
oil seals
New
a. Clean the outside of the front wheel hub.
b. Remove the oil seals
1
with a flat-head
screwdriver.
To prevent damaging the wheel, place a rag be-
tween the screwdriver and the wheel surface.
c. Remove the wheel bearings with a general
bearing puller
2
.
d. Install the new wheel bearings and oil seals
in the reverse order of disassembly.
Summary of Contents for V-Star XVS1100AWR
Page 1: ......
Page 38: ...PRINTED IN U S A ...
