PERIODIC MAINTENANCE AND MINOR REPAIR
6-12
6
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
Skip steps 4–6 if the oil filter cartridge is
not being replaced.
4. Remove the oil filter cartridge with
an oil filter wrench.
NOTE:
An oil filter wrench is available at a
Yamaha dealer.
5. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
NOTE:
Make sure that the O-ring is properly
seated.
6. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1. Engine oil drain bolt
1. Oil filter cartridge
2. Oil filter wrench
1. O-ring
U3D811E0.book Page 12 Friday, May 11, 2007 2:41 PM
Summary of Contents for V-stan 1300
Page 1: ...3D8 28199 11 XVS13AX C OWNER S MANUAL LIT 11626 21 29 ...
Page 2: ...EAU10041 U3D811E0 book Page 1 Friday May 11 2007 2 41 PM ...
Page 97: ...U3D811E0 book Page 3 Friday May 11 2007 2 41 PM ...
Page 98: ...PRINTED IN JAPAN 2007 05 1 6 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...