Yamaha U-MAX G27A Owner'S/Operator'S Manual Download

Page: 28 / 90

4-7

1. Set the main switch to “ON”.
2. Open the auxiliary DC jack cap, and then

insert the accessory power plug into the
jack.

1. Auxiliary DC jack

3. Close the auxiliary DC jack cap if the jack

is not being used.

CAUTION:

●

Do not use accessories requiring
more than the maximum rated capaci-
ty for the auxiliary DC jack. This may
overload the circuit and cause the
fuse to blow.

●

If accessories are used for extended
periods when the utility vehicle is not
being operated or with the main
switch set to “ON

”, the battery

will lose its charge and starting the
engine may become difficult.

●

Do not use an automotive cigarette
lighter or other accessories with a
plug that get hot because the jack can
be damaged.

Maximum rated capacity for the auxiliary
DC jack:

DC 12 V, 120 W (10 A)

EE.book Page 7 Thursday, June 24, 2004 9:43 AM

Summary of Contents for U-MAX G27A



























































































Search results

Summary of Contents for U-MAX G27A

Reviews:

Related manuals for U-MAX G27A

Brands by name

Popular brands

Yamaha U-MAX G27A, Owner'S/Operator'S Manual

Search results

Summary of Contents for U-MAX G27A

Reviews:

Related manuals for U-MAX G27A

Brands by name

Popular brands