8-8
3. Clean the gasket and plug surfaces and
install the spark plug, and then tighten it
to the specified torque.
WARNING
When removing or installing the spark
plug, be careful not to damage the insula-
tor. A damaged insulator could allow ex-
ternal sparks, which could lead to
explosion or fire.
Engine oil
Checking the engine oil level
1. Place the utility vehicle on a level sur-
face.
2. Lift the cargo bed. (See page 8-5–8-6 for
lifting and lowering procedures.)
3. Remove the dipstick, wipe it off with a
clean rag, and then insert the dipstick
back into the dipstick hole.
1. Dipstick
Spark plug torque:
20 Nm (2.0 m·kgf, 14.5 ft·lbf)
1
UJU510.book Page 8 Tuesday, May 18, 2004 11:28 AM
Summary of Contents for U-MAX G23A
