Tyros5 Owner’s Manual
25
Bas
ic Oper
at
ions
!0
Vocal Harmony Type
Displays the currently selected Vocal Harmony Type (page 89).
!1
ASSIGN slider function
Displays the function (parameter) assigned to the ASSIGN slider and its value (page 21).
!2
Transpose
Displays the amount of transposition in semitone units (page 46).
!3
Upper Octave
Displays the amount that the octave value is shifted (page 46).
!4
Registration Sequence
Appears when the Registration Sequence is active. For instructions on programming the
sequence, refer to the Reference Manual on the website.
!5
Clock
Once this instrument has accessed the network via the USB Wireless LAN Adaptor, the
current time is shown here.
!6
READ/WRITE lamp
Flashes briefly while this instrument is accessing the internal hard disk or the USB flash
memory connected to the [USB TO DEVICE] terminal.
!7
Volume Balance or Channel On/Off settings
Displays the volume balance or channel on/off settings among the parts. Use the
[1
]–[8
] buttons or sliders to change the settings.
The File Selection display is for selecting Voices, Styles, and other data. The File Selection display appears when you
press one of the VOICE or STYLE buttons, MULTI PAD CONTROL [SELECT] button, etc.
q
Location (drive) of data
•
PRESET
................ Location where pre-programmed (preset) data is stored.
•
USER
..................... Location where recorded or edited data is saved.
•
HD
.......................... Location where data is saved to an internal hard disk drive.
•
USB
........................ Location where data on USB storage device (flash memory,
etc.) is saved. This appears only when USB storage device(s) is
connected to the [USB TO DEVICE] terminal (page 101).
w
Selectable data (files)
The files that can be selected on this display are shown. If more than 10 files exist, page
numbers (P1, P2 ...) are shown below the files. Pressing the corresponding button ([1
],
[2
], etc.) changes the display page. When other pages follow, the “Next” button
appears, and for the previous page, the “Prev.” button appears.
Press the [BALANCE] button to call up
the volume BALANCE displays, and
press the [CHANNEL ON/OFF] button to
call up the CHANNEL ON/OFF displays.
NOTE
File Selection Display Configuration
w
q
e
File Selection display
The data, both pre-programmed and
your own original, are saved as “files.”
NOTE
Summary of Contents for Tyros5-76
Page 122: ...122 Tyros5 Owner s Manual MEMO...
Page 123: ...Tyros5 Owner s Manual 123 MEMO...
Page 124: ...124 Tyros5 Owner s Manual...
