–15–
2. Battery
!
Check the condition of the battery.
Refer to “CHECKING AND CHARGING THE
BATTERY” in chapter 3. (Manual No. :
5EK1-AE2)
Minimum open-circuit voltage
12.8 V more at 20
"
C
!
Is the battery OK?
YES
!
Clean the battery
terminals.
!
Recharge or
replace the battery.
NO
EAS00749
!
Check the main switch for continuity.
Refer to “CHECKING THE SWITCHES” in
P13.
!
Is the main switch OK?
YES
Replace the main
switch.
NO
3. Main switch
EAS00760
!
Disconnect the diode B from the wire har-
ness.
!
Connect the pocket tester (
Ω
#
1) to the
diode B terminals as shown.
!
Measure the diode B for continuity as follows.
4. Diode B
LIGHTING SYSTEM
ELEC
NOTE:
YES
NO
Replace the fuse(-s).
1. Fuse
!
Check the fuse for continuity.
Refer to “CHECKING THE FUSES” in chap-
ter 3. (Manual No. : 5EK1-AE1)
!
Is the fuse OK?
EAS00781
TROUBLESHOOTING
Any of the following fail to light: head
light, high beam indicator light, taillight,
auxiliary light or meter light.
Check:
1. fuse
2. battery
3. main switch
4. diode B
5. headlight relay
6. dimmer switch
7. wiring
(of the entire charging system)
!
Before troubleshooting, remove the following
part(-s):
1) side covers (left and right)
2) seat
3) fuel tank
!
Troubleshoot with the following special
tool(-s).
Pocket tester
90890-03112
EAS00738
