–10–
13
Rectifier/regulator
14
Clamp (rectifier/regulator lead)
15
Handlebar switch lead (left)
16
Clutch switch lead
17
Clutch cable
18
Starter cable
19
Neutral switch lead
20
Connect cover
21
C.D.I. magneto leads
CABLE ROUTING
SPEC
1
Brake hose
2
Throttle cable (return side)
3
Throttle cable (pull side)
4
Front brake light switch lead
5
Handlebar switch lead (right)
6
Starter motor lead
7
Battery positive lead
8
Wire harness
9
Clamp (wire harness)
10
Thermo switch lead
11
Sidestand switch lead
12
Grommet
A Clamp the handlebar switch lead
and front brake light switch lead
with a band.
B Pass the C.D.I. magnet leads (3
pieces), neutral switch lead
through the cover connector.
C Clamp the wire harness and rear
turn signal light lead (right). Point
the surplus part to the inner side.
D Cover the naked part of rear turn
signal light lead (right) with the
hose.
